request for quotation

Post Q&A

HashBoard

PSU

Control board

Overclock

Downclock

Liquid cooling

Mine construction

Operation and maintenance

The S9 control board top surface only 1 light on.

@Ada

2023-07-08 07:34

785

How to determine which voltage domain is normal when the L3+ hashboard has voltage domain imbalance?

@Ada

2023-07-08 07:30

719

Z11 hashboard is short-circuited to ground at 3.3V. After removing the IC (U3), inductor (L1) and capacitors (20, 22, 23, 24), the short circuit issue persists.

@Ada

2023-07-08 07:14

963

S9 hashboard report 0, No RI signal, replace chip 62 and chip 63, power on but still no signals.

@Ada

2023-07-08 07:02

771

Z11 hashboard LDO without 3.3V, Pin 1 with 12V input voltage.

@Ada

2023-07-08 06:59

936

The tester is normal, but machine is not working, and the log shows that the count is wrong. How to solve it?

@BTC-Miner

2023-07-08 06:52

797

S9 hashboard the voltage and resistance are both normal, replace severial chips but stil report 50.

@Ada

2023-07-08 06:40

770

The S9 hashboard report asic 62, replace the 62nd chip but still the same problem still exists.

@Ada

2023-07-08 06:36

774

The S9 hashboard report 0, the domain voltage is 8V and there is short circuit domain.

@Ada

2023-07-08 06:23

749

When testing the S9 board, as soon as the DC-DC is powered on, the hashboard immediately power off.

@Ada

2023-07-08 06:16

779

S9 report asic 0, each domain voltage 0.37V up to 0.57V after reprogramming PIC

@Ada

2023-07-08 05:52

781

What the problem shows in the picture? The hashboard is broken.

@Ada

2023-07-08 04:43

732

Z11 hashboard without 3.3V

@Ada

2023-07-08 04:39

712

Two hashboards of S9 both passed the single-board test, but the whole miner only had 2Th/s, one of the two boards without hashrate.Testing with an extended ribbon cable yields normal results.

@Ada

2023-07-08 03:52

706

S9 Miner status shows one hashboard ideal hashrate over 7,000 GH/S, but activate high-temperature protection. Reprogram the PIC, the same error.

@Ada

2023-07-08 03:42

721

All the T9+ hashboards can be detected,but all without hashrate.

@Ada

2023-07-08 03:22

780

Single board test result keeps showing "check", without any specific result.Tested many times always the same.

@Ada

2023-07-08 03:17

707

T9+ hashboard, 12V normal, 3.3V normal, MOS, PIC, power management chip are all normal, but no 9V output.

@Ada

2023-07-08 03:07

766

The single board test is fine, but it cannot achieve the required hashrate.

@Ada

2023-07-08 02:54

746

Chain 1 has low hashrate, pass single-board test OK,but reports temprature 15°C

@Ada

2023-07-08 02:33

708

Active Users

@Ada

43 participate in

@Sunny Anusi

37 participate in

@Yoda

34 participate in

@BTC-Miner

18 participate in

@Bogard

3 participate in

@jread352

2 participate in